Blog | Innate Chiropractic Center

Chiropractic hip exercises for Lansing

Here is a simple exercise that you can do at home with no equipment.
It works the gluteus medius/minimus, piriformis and hip lateral rotators muscles.
The purpose of this exercise is to Increase hip strength and muscular endurance. By doing this exercise you can have the benefits of Improved stability, functional strength and injury

Begin lying on side on the floor with legs extended.
Top leg should attain a straight line through hip and shoulder.
Bottom leg may be bent for added stability.
Activate core muscles.
Lift top leg upward, abducting leg as foot simultaneously rotates. This will result in a toe-up position.
Slowly return to start position.
Repeat for prescribed repetitions and sets.

Top 4 Core-Building Exercises

The human body has 29 core muscles located in the back, abdomen and pelvis regions. They help to give a person a stable center of gravity, while helping in controlling movements, supporting whole of the back and giving out a semblance of stability.

These core muscles form the foundation on which the movement of the body is based. Strong core muscles tend to resist injury and form a protective cushion for the whole spinal column.

However, weak core muscles can cause a person to develop a poor posture, pain all over the body, and make the individual more prone to injuries from everyday activities.

Exercise on a regular basis can make these muscles stronger, but it is necessary to get the posture right before getting on with the exercises.

Good Posture

Good posture not only makes a person look attractive, but it does wonders for the overall skeletal structure. Chiropractic practice pays a lot of attention to proper posture. Correct posture will ensure that a person’s muscles, organs along with joints and bones are in their correct, natural positions.

A bad posture can result in a lot of problems for the body, following are examples of a poor posture:

Drooping shoulders
Head or neck held forward
Lower back arching too much
Sitting with a wallet in the back pocket
Phone receiver being held between neck and shoulder
Drooping forward while sitting

These postures must always be avoided.

Bridge

The person should lie on the back with knees bent. Then the abdominal muscles should be contracted while the person slowly raises the hips off the floor then holding the position for around 10 seconds.

The hips should then be lowered to the floor and the same method repeated again.

Bird Dog

The person should get down on their hands and knees while keeping the head and neck aligned with their back. The core muscles are then contracted; one arm raised meanwhile raising the opposite leg.

Plank

The person should lie on their stomach with the palms facing down. They should then slowly start to rise off the floor while resting on toes and elbows. The back should be kept as flat as possible, core muscles in a contracted position and held for at least 12 seconds before lowering themselves to the floor.

Segmental Rotation

In this exercise, the individual is to lie on the back with their knees bent and the feet should be flat on the floor. While keeping the shoulders flat on the floor, they should let their knees fall slowly towards the left. After returning the legs back to the original starting point, the same action should be repeated.

Image Used under Creative Commons license. Photo Credit: Plank.jpg

Chiropractic Care During Pregnancy

Chiropractors that are experienced in chiropractic and pregnancy know the importance of proper back care during such a sensitive period. All chiropractors are trained to work with women especially when it comes to back conditions that are associated with pregnancy. This is because chiropractic and pregnancy involves the maintenance of the spinal column, discs, bone geometry and the related nerves without the inclusion of invasive surgery. In other words, the medical practice adjusts the misalignment of joints especially when it comes to the spine.

Any formerly pregnant woman can attest to the muscle strain that is a part and parcel to pregnancy. Researchers say that almost half of all expecting mothers will experience lower back pain at some point during their pregnancy. Spinal surgery is out of the question when it comes to the well being of two lives and this is exactly why chiropractic care is the perfect non-invasive solution for such problems.

Why does a Pregnant Woman need Chiropractic care?

The human body undergoes a series of physiological and endocrine changes to prepare itself to sustain a life during pregnancy. No one knows that better than expecting mothers. However, such a sensitive stage may also cause misaligned joints that are symptomatic of –

Pelvic changes
Protruding abdomen and curved back
Poor posture

A woman’s pelvis may not have enough room for a developing baby if it is misaligned. This is also why establishing pelvic balance is such an important task in chiropractic and pregnancy care. A pelvis that is misaligned may also cause complications during the actual birth as well. This may also prevent the expecting mother from having a natural birth and her doctor to resort to invasive c-sections.

Chiropractic care during pregnancy also comes with the following benefits –

Ensuring a healthy pregnancy
Relief from back, neck and joint pain
Prevention of a potential cesarean delivery
Reducing the time of labor and delivery
Reduce morning sickness

The benefits of chiropractic and pregnancy speak for themselves. This is also why more women are seeking chiropractic care now more than ever before and why health care providers recommend such services to expecting mothers. It is easy to see why. Medical specialists who specialize in back care invest more in the fertility and overall wellness of pregnant women or women who try to conceive.

Image used under Creative Commons Licensing: pregnant profile III by mahalie stackpole

Choose Chiropractic Care for Healthier Living

Chiropractic care is a medical system that aims to eliminate the root of a problem rather than just suppressing the symptoms. Chiropractors manipulate the spinal column along with other parts of the body with the aim of easing pain, promoting the body’s systems to naturally heal it along with prescribing exercise to eliminate postural problems.

This approach introduces a healthier lifestyle for an individual.

Chiropractic Treatment Techniques

Here are numerous chiropractic treatment techniques that are used in treating patients:

Activator

The activator is a device that is used to correct minor misalignments in the spine. It sends a small impulse that is sufficient enough to move the vertebrae without causing any injury.

Bio-Energetic Synchronization Technique (BEST)

This is a non-forceful technique that is used to remove blocked energy in the body and allows it to heal itself.
Cox Flexion Distraction

This procedure is a safe alternate to back surgery and is designed to relieve lower back pain by altering the spinal column. However, it is also used to treat disc herniation, stenosis, arm and neck pains as well as many other complications.
Applied Kinesiology

Applied Kinesiology gauges a muscles’ strength or weakness to find an illness.
Thompson Terminal Point

This technique utilizes a special drop table to adjust the full length of the spine.

Sacro-Occipital Technique (SOT)

The SOT technique is designed to reduce and sometimes completely eliminate pain in the head, neck, spinal cord, TMJ as well as improve function of many organs.

Logan Basic Technique

The Logan technique applies a gentle and sustained pressure at the base of the spine, that corrects the balance of the spinal column and releases tension.
A gentle, sustained pressure is exerted at the base of the spine. Correcting the sacrum corrects the rest of the spine.

Nimmo Technique

Nimmo technique is designed to relieve people of their chronic pain, whether in the muscle system, nervous system or skeletal system.

Orthotics

Orthotics focuses design and construction of external devices that help in modifying the structure of the body, such as uneven leg length, incorrect spinal curvature and tilted pelvis.

Emphasis on Exercise

Chiropractors believe that physical exercise is essential for the well-being of the human body. This is why they prescribe exercises that are easy to carry out at home. These exercises aim at reducing or preventing obesity that is a major factor in causing heart diseases, diabetes and many other diseases.

Image used under Creative Commons Licensing: Activator II adjustment instrument.png

Ergonomics and Employee Productivity

Ergonomics has become a very popular field, which deals with designing suitable furniture, which is comfortable for individuals, both at home and in the office environment. The absence of ergonomically fit furniture and surroundings, results in different muscular problems in individuals like back pain, neck ache, strains, and carpal tunnel syndrome. Chiropractors provide treatment for alleviating the pain caused because of engaging in strenuous activities throughout the day.

How Is Employee Productivity Linked To Ergonomics?

Ergonomics or human factors, focuses on designing furniture and workplaces, so as to ensure convenience and ease for individuals, both at home and at the office. An ergonomically fit work environment is designed to ensure, that the working stations and the furniture used, are in accordance with the industry standards. It facilitates the functioning and activity of employees, engaged in work at the computer or at the factory floor.

Employees working in an environment, in which the work spaces and the computer equipment are stationed within easy reach, and do not cause any strain, will remain fit and healthy, resulting in efficient productivity. A considerable percentage of employees, contract different muscular pains and strains, which affects their work efficiency. In cases of extreme pain, sometimes individuals have to take time off from work in order to regain enough fitness to resume work.

Benefits of Ergonomically Fit Surroundings

An office having a work station and space, specifically designed keeping in mind the ergonomic standards prevalent in the industry, facilitates the factory workers and office employees in performing their duties efficiently and on time. This improves the overall productivity, resulting in increasing profits for the business.

By designing a safe and ergonomically fit factory production site, companies can ensure minimum accidents and absences of workers. The suitably designed production lines, with the appropriate equipment, increase productivity and worker efficiency, and reduce the wastes to a minimum.

The correct usage of lights and space in the workplace improves productivity and minimizes errors, which results in high job satisfaction.

An ergonomically fit work place is not only convenient for the employees and workers, but it also benefits the business by improving the productivity levels of the company. The improved morale and work efficiency of the employees, increases job satisfaction, and also minimizes the risk of accidents and muscular strains, caused because of inconveniently and unsuitably designed work places. Chiropractors provide treatment to employees suffering from various muscular strains and pains, contracted while working in an office.

Image Used under Creative Commons license. Photo Credit: US Navy 020614-N-0552D-001 SPAWAR award winning employee.jpg

Connect With Us